Seiko 7T52 - Calendar Setting

Engsh
6
When
setting the hour
hand,
check
that AM/PM is correctly
set. Turn the
set for the
A.M. or P.M. period. If the
date changes to the next, the time
is set
for the A.M. period.
If it does not
change, the time is set for the P.M.
period.
If the
stopwatch is measuring and
the
crown
is pulled out to the second
click to set the time, the stopwatch
hands are reset to "O"
position.
i ~ wta
'1
rt
1"
r ""1
mar"
:
hour hand past
the 12 o'clock marker to determine
whether the watch is K: P} J“ E if J
%:|_
i
Crown
‘ (First click)
Date
1. Pull out
the crown to the rst click.
2. Turn the crown clockwise
till the date of the previous
day appears.
3. Pull out the crown to
the second click, and advance
the hour and minute
hands till the desired date
appears. Then, reset the
time as described in
"MAlN TIME SETTlNG”.
4. Push the crown back in to the
normal position.
Note: Do not set the date between
9:00 p.m. and 1:00 a.m.
Otherwise, the
date may not change
properly.
If it
is necessary to
set the date during
that time period, first set the
hour hand to any time
outside this
period, set the date and
then reset the hour hand to the
correct time.
U3
us‘3
7