What to do if Seiko ASTRON 8X53 GPS SOLAR reception is not started even with operation of GPS signal?
If your Seiko Watch isn't starting reception even when you're trying to get a GPS signal, try moving to a location where GPS signals are more easily received. This may solve the problem.
What to do if second hand stops at the 45-second position before the reception on Seiko Watch?
If the second hand on your Seiko Watch stops at the 45-second position before reception, you should reset the in-flight mode. This action might solve the problem.
Why Seiko Watch GPS signal reception is not working under low temperatures?
When your Seiko Watch tries to receive GPS signals in low temperatures (0°C or less), the charging capacity and/or charging efficiency are lowered, which can cause reception to stop. To avoid this, regularly charge your watch by exposing it to light.
General| Movement | GPS Solar |
|---|---|
| Caliber | 8X53 |
| Case Material | Titanium |
| Dial Color | Black |
| Band Material | Titanium |
| Water Resistance | 100 meters |
| Power Reserve | 6 months |
| Functions | world time |
| Crystal | Sapphire |
| Battery Life | Up to 2 years on full charge |
Safety precautions for watch usage and storage conditions.
Details on how the watch receives GPS signals for time setting and location.
Explanation of how the watch is powered by solar energy.
How the watch automatically adjusts its time based on GPS signals.
Important notes and considerations when adjusting the watch's time zone.
Instructions to activate the in-flight mode to prevent GPS signal interference.
Steps to deactivate the in-flight mode after use.
Procedure for manually setting the watch's time zone.
Guide to manually adjust the sub-dial for the correct time zone.
How to set the watch time manually without changing the time zone.
Guidelines for daily cleaning, maintenance, and handling of the watch.
Information on watch performance, caliber, and case number identification.
Instructions on how to put on and take off the watch with the clasp.
Guide to adjusting the length of the watch band using the clasp.
Important information regarding the replacement of the watch's secondary battery.
Guidelines for safely charging the watch to prevent damage.
Details on warranty coverage, repair procedures, and service contact.
Information on periodic inspection, adjustment, and cleaning (overhaul) services.
Initial checks for issues preventing GPS signal reception.
Procedure to set time manually when GPS reception is not possible.
Initial checks for misaligned hands, sub-dials, date, and indicator.
How the watch automatically corrects hour, minute, and second hand positions.
How to disable the automatic light detection feature.
Steps to turn on the automatic light detection feature.
Resolving problems related to second, hour, and minute hand movements.
Solutions for issues with receiving GPS signals.
Correcting misaligned date display issues.
Correcting misaligned day hand (day of week) display.
Troubleshooting problems with adjusting the sub-dial.
Correcting misaligned indicator hand display.
Troubleshooting problems encountered during watch operation.
Addressing miscellaneous problems like dial glass blur.
To Next Page