49
Calculator
● Keys and their Functions
CALC
– Selects Calculator mode, Currency, Metric/Imperial and Clothing Size Converters.
CE/C
– Clears last entry with one press, clears all with two presses.
1 ~ 0 – Number input keys. +, –, x, ÷ – Mathematical function keys.
MC
– Clears memory.
MR
– Recalls number from memory.
M+
– Enters number into memory.
+/– – Changes sign of number. % – Percentage key.
* The number stored in the memory is held when the calculation is changed, the mode is switched
or the power is turned off.
● Correcting and Clearing Entries
If you enter an incorrect number, press (
CE/C
) to clear the entire displayed number,
then re-enter the correct number. If you press an incorrect mathematical function key,
simply press the correct function key afterwards.
If “ E ” appears in display:
The answer to a calculation is more than 12 digits, the memory is full, or 0 has been
used as a divisor.
Press (
CE/C
) to remove the “ E ” and continue.
CLR
CLR
To Next Page
Loading...