Seiko H249 User Manual

SEIKO DUO-DISPLAY QUARTZ ALARM CHRONOGRAPH
CAL. H249
CHARACTERISTICS:
1. Analogue indication: Two-hand indication (hour and minute).
2. Digital time and calendar: Hour (24 hour indication or 12 hour
indication), "A" (AM) / "P" (PM), minute, second, date and day of
the week. The month is displayed only when the calendar is adjusted.
3. Tri-time function: The home time display and the local time display
in the digital function, and the time display in the analogue
function.
Note:
Both the analogue and digital functions are activated by the same
crystal oscillator. However, as each function of the watch operates
independently, the operation of any function does not affect the
accuracy of any other function.
4. Stopwatch display: Minute, second and 1/10 second up to 30 minutes.
When the measured time exceeds 30 minutes, the display will reset to
"O OO-o" and starts measuring.
5. Alarm display: Hour, minute and "A" (A.M.) / "P" (P.M.) (12 hour
indication). The alarm can be set to ring at any desired hour and
minute.
6. Hourly time signal: The time signal can be set to ring every hour on
the hour.
7. Water Resistant: When "WATER RESISTANT" is shown on the back of your
watch case, the watch is water resistant.
8. Battery life indicator: All the digits in the display start flashing
when the battery life nears its end.
9. Battery: Use a miniature battery, SEIKO (SEIZAIKEN), TR926W, Maxwell
SR926 or U.C.C. 399.
/Continued.....
Crown
Button B
Button A
Original Document Provided by Seiko.
OCR & Formatting by Deomandinka.

Seiko H249 Specifications

General

Movement	Quartz
Case Material	Stainless Steel
Strap Material	Stainless Steel
Type	Wristwatch
Brand	Seiko
Model	H249
Category	Watch
Band Material	Stainless Steel

Summary

Watch Characteristics

Analogue Indication

Features a two-hand indication for hour and minute.

Digital Time and Calendar

Displays hour (12/24 hr), AM/PM, minute, second, date, day. Month shown when adjusted.

Tri-Time Functionality

Includes home time, local time digital displays, and analogue time display.

Stopwatch Display

Measures minutes, seconds, and 1/10 seconds up to 30 minutes.

Alarm Display and Setting

Shows hour, minute, AM/PM for alarm. Can be set to ring at any desired time.

Hourly Time Signal

Can be set to ring every hour on the hour.

Water Resistance

Indicates water resistance when 'WATER RESISTANT' is shown on the case back.

Battery Life Indicator

All display digits flash when battery life is nearing its end.

Battery Specifications

Uses miniature batteries like SEIKO TR926W, Maxwell SR926, or U.C.C. 399.

Setting the Watch

Setting Analogue Time

Instructions on adjusting minute and hour hands using the crown.

Setting Digital Time, Calendar, and Military Time

Procedure to set digital time, date, and choose 12/24 hour format.

Setting Local Time

Guide to setting a secondary time zone display.

Setting and Managing Alarm

Steps to set, engage, and disengage the alarm function.

Using Stopwatch Function

How to start, stop, and reset the stopwatch feature.

Watch Care and Maintenance

Preserving Watch Quality

Avoid shocks and extreme temperatures for accuracy.

Water Resistant Watch Care

Rinse with fresh water if exposed, dry thoroughly. Do not operate when wet.

Non-Water Resistant Watch Care

Handle with care to prevent water damage; consult dealer if wet.

Periodic Servicing

Recommend checking case, buttons, crown, and seals with an authorized dealer.

Battery Replacement

Battery Life Expectancy

Batteries typically last 2-3 years, but actual life may vary.

Battery Replacement Procedure

Replace when digits flash; consult an authorized Seiko dealer.

Alarm Usage Impact on Battery

Frequent alarm use (>10 seconds/day) may reduce battery life.