iii
PREFACE
This reference manual describes the specifications and basic operating procedures for the LTP1245 (for
RoHS) Line Thermal Printer Mechanism.
For the LTP1245 (RoHS supporting), four models are available:
• LTP1245R-C384-E
• LTP1245S-C384-E
• LTP1245T-S384-E
• LTP1245U-S384-E
In this reference manual, the information mentioned as LTP1245 is common to all models
unless otherwise noted, and if the information is different depending on the model, specific
model name is mentioned clearly.
Chapter 1 “Precautions” describes safety, design and operational precautions. Read it thoroughly before
designing so that you are able to use the LTP1245 properly.
SII has not investigated the intellectual property rights of the sample circuits included in this manual. Fully
investigate the intellectual property rights of these circuits before using.
Also, when designing the circuits based on the sample circuits in this reference manual, use them after
thorough verification.
To Next Page
Loading...
