What to do if Seiko S149 motor does not run?
If your Seiko Watch's motor isn't running even when the power switch is turned on, the issue might be due to weak batteries. Try replacing them with new ones. Also, check if the batteries are installed correctly and ensure the paper isn't stuck inside. Remove the paper if it is.
Why are digits not printing correctly on my Seiko Watch?
If your Seiko Watch prints digits or letters that are defective, or if no data is printed at all when you press the start button, it could be due to a few reasons. First, ensure the cord is correctly connected. Second, check the cord plug for any water or foreign matter and wipe it off. Finally, make sure the paper is inserted properly.
How to fix Seiko S149 Watch if paper is not advancing?
If the paper is not advanced by pressing the paper advancing switch on your Seiko Watch, this could be due to several reasons. First, try replacing the batteries with new ones, as weak batteries can cause this issue. Second, check for any stuck paper and remove it. Finally, ensure that the roll paper is properly shaped and not out of round.
What to do if Seiko S149 Watch paper advances irregularly?
If, when you press the start button on your Seiko Watch, data prints but the paper advances irregularly, the issue might be due to the paper being stuck. Remove the paper to resolve this. Alternatively, weak batteries could be the cause, so try replacing them with new ones.
Why Seiko S149 is not printing anything?
If no data prints and the paper doesn't advance at all when you press the start button on your Seiko Watch, there are a few potential causes. First, weak batteries could be the problem, so try replacing them with new ones. Second, ensure the batteries are installed correctly. Finally, check that the power switch is turned "ON" before pressing the start button.
Why is auto start time not transferred on my Seiko S149 Watch?
If the auto-start time is not being transferred on your Seiko Watch, it could be due to the cord not being connected properly. Make sure the cord is correctly connected. Another possible cause is water or foreign matter sticking to the cord plug. Ensure you wipe off any water or foreign matter.
General| Model | S149 |
|---|---|
| Category | Watch |
| Movement | Quartz |
| Case Material | Stainless Steel |
| Dial Color | Black |
| Display | Analog |
To Next Page
