7
English
English
6
HOW TO CHARGE AND START THE WATCH
l
When you start the watch or when the energy in the rechargeable battery is
reduced to an extremely low level, charge it sufficiently by exposing the watch
to light.
l
Instant-start function:
When the watch is exposed to sunlight or strong artificial light (of more than
1,000 lux), it will start operating immediately with the second hand moving at
2-second intervals.
1 Expose the watch to sunlight or s trong
artificial light.
• Whenthewatchhasstoppedoperating,thesecond
handwillstartmovingat2-secondintervals.
2 Keep the watch exposed to the light until the
second hand moves at 1-second intervals.
3 When the watch is charged after it has
completely stopped, set the date and time
before wearing the watch.
•
See “GUIDELINE OF CHARGING TIME/ACCURACY” .
▲
▲
NOTES:
1. Ifyourwatchhasasecondhand,whentheinstant-startfunctionisactivatedafter
thewatchisexposedtolight,thesecondhandstartsmovingat2-secondintervals
immediately,buttheenergystoredintherechargeablebatteryisnotsufcient.If
thewatchisturnedawayfromthelight,itmaystopoperating.
2. Itisnotnecessarytochargethewatchfully.Itisimportant,however,tocharge
thewatchsufciently,especiallyincaseofinitialcharge.
Caution for charging
l
When charging the watch, do not place it too close to a photoflash
light, spotlight, incandescent light or other light sources as the watch
temperature will become extremely high, causing damage to the parts
inside the watch.
l
When exposing the watch to sunlight to charge it, do not leave it on the
dashboard of a car, etc. for a long time, as the watch temperature becomes
extremely high.
l
While charging the watch, make sure the watch temperature does not
exceed 50 °C. (For Cal. V110, V145, V181 and V182)
l
While charging the watch, make sure the watch temperature does not exceed
60 °C. (For Cal. V111, V114, V115, V116, V117, V137, V147, V157, V158 and V187)
CAUTION
To Next Page
Loading...
