Seiko V147 User Manual (English)

Other manuals for Seiko V147

Questions and Answers:

A
Amy DonovanAug 16, 2025
Why is my Seiko V147 gaining or losing time?
- N
  Nicholas DavisAug 17, 2025
  If your Seiko Watch is losing or gaining time, it might be due to a few reasons. It could be that the watch has been exposed to extremely high or low temperatures for an extended period. In this case, return the watch to a normal temperature and then reset the time. Another cause might be contact with a magnetic object. Move the watch away from the magnetic source. If the issue persists, contact the retailer. Also, dropping the watch or exposing it to strong vibrations can affect accuracy. Reset the time, and if the problem continues, contact the retailer.
T
taylorkurtAug 22, 2025
What to do if my Seiko Watch stops operating?
- V
  Veronica TranAug 22, 2025
  Your Seiko Watch may have stopped because the power is completely depleted or low. Ensure the battery is sufficiently charged until stable hand movement is achieved. If you wear the watch daily, make sure it is not hidden by your sleeves or clothing, and place it in a bright location when you take it off.
B
Bradley MartinAug 25, 2025
Why does my Seiko V147 Watch temporarily gain or lose time?
- E
  eromeroAug 26, 2025
  Your Seiko Watch may temporarily gain or lose time if it has been exposed to extremely high or low temperatures for an extended period, or if it has been left near an object with a strong magnetic field. Also, dropping the watch, hitting it against a hard surface, or exposing it to strong vibrations can cause this issue. If the watch returns to room temperature, the accuracy should return to its original state. Correct the magnetic field condition by moving the watch away from the magnetic source and resetting the time. If accuracy does not return after setting the time, consider seeking professional assistance.
K
Kelly ClarkAug 27, 2025
How to fix Seiko Watch date changing at noon?
- C
  Christopher JohnsonAug 27, 2025
  If the date on your Seiko Watch changes at 12 o’clock noon instead of midnight, the AM/PM setting is not properly set. To correct this, advance the hands by 12 hours.
T
Tina MannAug 30, 2025
Why does my Seiko V147 gain or lose time?
- T
  timothy04Aug 30, 2025
  If your Seiko watch gains or loses time, it might be due to a few reasons. It could be that the watch has been exposed to extremely high or low temperatures for an extended period; in this case, return the watch to a normal temperature and then reset the time. Another cause might be close contact with a magnetic object; move the watch away from the magnetic source. If neither of these solutions work, or if the watch was dropped or exposed to strong vibrations, reset the time, and if the issue persists, contact the retailer.
A
Aaron CurrySep 1, 2025
Why my Seiko Watch doesn't resume normal movement after charging?
- T
  Timothy EdwardsSep 1, 2025
  If your Seiko watch doesn't resume its normal one-second interval movements after being exposed to light for the required time, the light source may be too weak. Refer to the "Standard Charging Time" section to ensure adequate charging.
J
John GonzalezSep 4, 2025
What to do if the date changes at 12 o'clock noon on my Seiko V147 Watch?
- S
  saragarciaSep 5, 2025
  If the date on your Seiko Watch changes at 12 o'clock noon, it means that the AM/PM setting is not properly configured. To correct this, advance the hands by 12 hours.
C
Christine RogersSep 7, 2025
What to do if the second hand on my Seiko V147 Watch moves at two-second intervals?
- T
  Timothy GarciaSep 7, 2025
  If the second hand on your Seiko Watch is moving at two-second intervals, it indicates that the electrical energy stored in the secondary battery is very low. To resolve this, recharge the watch. Also, ensure that the watch is not covered by your clothing cuff. When not in use, leave it in a bright place to ensure sufficient light exposure.
C
candicekrauseSep 10, 2025
What to do if blur in the display persists in Seiko V147?
- N
  nicole82Sep 10, 2025
  If you notice persistent blur in the display of your Seiko Watch, it may be due to a small amount of water that has entered the watch, possibly because of the deterioration of the gasket. In this case, consult the retailer from whom you purchased the watch.
J
Jodi HollowaySep 10, 2025
How to fix a Seiko V147 Watch that has stopped operating?
- S
  Shane CastroSep 12, 2025
  If your Seiko Watch has stopped operating, it is likely that all the electrical energy stored in the secondary battery has been used up. To fix this, recharge the watch.