Seiko V147 - Page 10

B B Type
1
While pressing the push buttons on both sides
of the flap, lift to open the clasp.
Push button
2
Remove the pin from the adjustment hole.
Slide the band left and right, and insert the pin
into the adjustment hole at an appropriate
length. Push the buckle and fasten the clasp.
Buckle
Pin
Adjustment hole
EN
33
3
TO PRESERVE THE QUALITY OF YOUR WATCH
C C Type
●
How to wear or take off the watch
1
While pressing the push buttons on both sides
of the flap, pull the band out of the movable
loop and fixed loop. Then open the clasp.
Fixed loop
Movable loop
Buckle
Flap
Push button
2
Place the tip of the band into the movable loop
and fixed loop, and fasten the clasp by
pressing the frame of the buckle.
EN
34
3
TO PRESERVE THE QUALITY OF YOUR WATCH
●
How to adjust the length of the band
1
While pressing the push buttons on both sides
of the flap, pull the band out of the movable
loop and fixed loop. Then open the clasp.
Fixed loop
Movable loop
Buckle
Flap
Push button
2
Press the push buttons again to unfasten the
flap.
EN
35
3
TO PRESERVE THE QUALITY OF YOUR WATCH
3
Pull the pin out of an adjustment hole of the
band. Slide the band to adjust its length and
find an appropriate hole. Place the pin into the
hole.
Pin
Adjustment hole
Pin
Adjustment hole
4
Fasten the flap.
EN
36
3
TO PRESERVE THE QUALITY OF YOUR WATCH