EasyManua.ls Logo

Seiko V176 - Setting the Alarm Time; Specifications

Seiko V176
20 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
Caliber number V172 V174 V175 V176
1. Features
Main time with 3 hands
(hour, minute, second)
Date display
Stopwatch (1/5-second
and minute hands)
Small alarm display (hour
and minute hands)
Main time with 3 hands
(hour, minute, second)
24-hour hand
Date display
Stopwatch (1/5-second
and minute hands)
Small alarm display (hour
and minute hands)
Main time with 3 hands
(hour, minute, second)
24-hour hand
Date display
Stopwatch (1/5-second
and minute hands)
Main time with 3 hands
(hour, minute, second)
Date display
Stopwatch (1/20-second,
second and minute
hands)
2. Frequency of crystal
oscillator
32,768 Hz (Hz= Hertz, cycles per second)
3. Loss/gain (Monthly
rate)
Loss / gain ±15 seconds on a monthly rate (Except the case when the watch is used without an automatic
time setting by receiving a radio signal and when it is worn on the wrist within a normal temperature range
between 5°C and 35°C).
4. Operational
temperature range
-10 °C ~ +60 °C
5. Driving system Step Motor, 4 pieces Step Motor, 3 pieces Step Motor, 4 pieces
6. Power source Secondary battery, 1 piece
7. Duration
Approx. 6 months (if the stopwatch is used for 1 hour per day, and the alarm is
used one time to sound for 20 seconds per day)
Approx. 6 months (if
the stopwatch is used
for 1 hour per day)
8. IC (Integrated
Circuit)
Oscillator, frequency divider and driving circuit C-MOSIC, 1 piece
* The specifications are subject to change without prior notice due to product improvements.
EN
72
8
SPECIFICATIONS

Related product manuals