To Next PageTo Next PageWhat to do if the Seip Garage Door Opener microprocessor has lost data?
If your Seip Garage Door Opener's microprocessor has lost data, attempt to run the learning cycle. If this doesn't resolve the issue, the motor-head will need a replacement.
How to fix a running-time error on a Seip TM 60?
If you are experiencing a running-time error with your Seip Garage Door Opener, examine the blocks and attempt to reprogram the P.C.B., for example, by initiating the learning cycles.
General| Brand | Seip |
|---|---|
| Model | TM 60 |
| Category | Garage Door Opener |
| Language | English |
Lists available devices for operator activation, including standard and optional equipment.
Explains the OPEN-STOP-CLOSE principle and how the operator reacts to obstacles.
Explains the 433 MHz AM remote control, rolling code, and standard/optional transmitters.
Details the process of registering a hand transmitter with the operator's receiver.
Instructions for programming more hand transmitters remotely after the first one is registered.
Procedure to erase all previously programmed hand transmitters from the receiver.
Details specifications and battery requirements for MIDI and MINI transmitters.
Explains factors that can affect the remote control's operating range.
Information on compatibility and programming the operator with the HomeLink car system.
Explains how the operator handles rapid door weight changes and obstacle detection.
Guides on troubleshooting when the operator's status light indicates an error.
Instructions for manually operating the garage door during a power outage using the emergency release.
