Seip A 45 User Manual

V01-00 Piezo250
Einbauanleitung
für die Garagentorantriebe
Bitte lesen Sie diese Einbauanleitung!
Für durch falsche Montage entstehende Schäden gewähren wir keine Garantie!
Geprüft nach 89336 EWG und 73/23 EWG
Installation Instructions
for the Automatic Garage Door Operators
Please read these instructions carefully!
We disclaim all liability under the terms of teh warranty for any damage caused by improper installation!
Approved according to the European Directives 89336 EEC and 73/23 EEC
Montagevejledning
for garageportåbnere
Læs venligst nærværende montagevejledning!
Vi påtager os ikke garanti for skader, som måtte opstå som følge af forkert montage!
Kontrolleret iht. 89336 EØF og 73/23 EØF
Monteringsanvisning
för garageportsmotorer
Läs denna monteringsanvisning!
Godkänt enligt de europeiska riktlinjerna 89336 EEC och 73/23 EEC.
D GB DK SV
A 45
A 60

Seip A 45 Specifications

General

Manufacturer	Seip
Type	Garage Door Opener
Model	A 45
Motor Type	AC
Remote Control	Yes
Speed	16 cm/s

Summary

Preparation and Prerequisites

Power Supply and Electrical Safety

Pre-Mounting the Operator

Pre-Mounting Safety Warnings

Crucial warnings regarding limit-switches and potential damage.

Main Mounting Procedure

Safety: Locking Bolt Removal

Remove door locking bolts before operation to prevent damage.

Installing Accessories and Safety Devices

Control Electrical Safety

Warning against applying external voltage to the operator's controls.

Emergency Release Operation

Release: Single Garage Access

Steps to connect release to door handle for single access garage.

Emergency Release Testing

Procedure to test the emergency release function with a second person.

Adjusting Limit Switches

Opening Limit Switch Setting

Adjust switch for the door to stop 30mm before final resting position.

Closing Limit Switch Setting

Adjust switch for the door to lightly touch the frame when closed.

Limit Switch Adjustment Safety

Crucial warnings about adjusting before mounting and potential damage.

Electronic Board and Settings

Electronics Safety Precautions

Warning to unplug power before connecting and avoid external voltage.

Operating Force Adjustment

How to set the force for opening and closing directions using potentiometers.

Radio Remote Control Systems

Remote Control Programming

Receiver Memory Clearing

Transmitter Code Learning

Procedure to pair transmitters with the receiver for operation.

Technical Specifications

Wiring Diagram

Overall Safety Instructions

Installation Safety

Crucial safety warnings for installation, including heights and rope removal.

Operational Safety

Guidelines for safe operation, child safety, regular checks, and professional repairs.

Troubleshooting Guide

Opener Not Responding/Jammed

Solutions for power failure, freezing, or general non-response.

Control Response Problems

Unintended Door Movement

Door Operation Issues

Motor/Lighting Problems