Why can't my Seitron Measuring Instruments battery hold a charge?
If the battery can't hold a charge after a complete charging cycle, it's likely due to old batteries reducing their capacity. If the autonomy has become unacceptable it is advisable to replace the battery pack.
What to do if Seitron Measuring Instruments report a sensor error during the tightness test?
If a sensor error is reported during the tightness test, check for the correct connection of the hose to the P3 pressure input.
Why do the batteries on my Seitron Measuring Instruments die quickly?
Short battery life can be caused by: * Low temperatures, which limit battery capacity. Storing the instrument at higher temperatures is recommended. * An old battery. If battery life is unacceptable, replace the battery.
What does 'Max. Lim.' or 'Min. Lim' mean on Seitron NOVO?
“Max. Lim” or “Min. Lim.” appear when the sensor detects a value beyond the analyzer’s measuring range. These indicators are replaced by numbers when the instrument detects values within the measuring range.
What does '----' mean on the Seitron Measuring Instruments analysis screen?
The symbol “----” appears when the instrument can't calculate a numerical value based on the flue gas analysis. These symbols will be replaced by numbers when the analyzer detects valid combustion data.
How to fix a Seitron NOVO that won't turn on?
If your instrument isn't turning on, try the following: * Keep the On/Off key depressed for at least 3 seconds. * If the battery is low, connect the battery charger to the instrument. * If the battery may not be connected to the instrument, access the internal parts and insert the battery connector into its socket on the printed circuit.
What to do if my Seitron Measuring Instruments show a flue gas temperature (Tf) error?
If the analysis screen shows a flue gas temperature error, it could be due to: * The thermocouple not being connected; connect the thermocouple to the analyzer.
General| Brand | Seitron |
|---|---|
| Model | NOVO |
| Category | Measuring Instruments |
| Language | English |
Provides details about the manual's content and usage guidelines.
Explains danger levels and symbols used in the manual for safety.
Covers essential safety checks and procedures for instrument operation.
Defines the intended applications and scope of use for the combustion analyzer.
Outlines prohibited uses of the product and associated risks.
Details safety precautions for handling and using the Li-Ion battery package.
Explains the fundamental operating principle of the gas sampling and analysis process.
Details the types of sensors used and their maintenance requirements.
Describes the CO sensor dilution feature for extending measurement range.
Explains the automatic zero calibration process for the instrument's sensors.
Lists supported fuel types and how to configure custom fuels.
Details the function and features of the internal gas extraction pump.
Describes the pressure sensor used for draft and differential pressure measurements.
Covers the instrument's integrated or external printer functionality.
Explains simultaneous measurement of key parameters for combustion analysis.
Details how to perform and record black smoke measurements.
Describes the measurement of ambient CO for safety checks.
Explains how to perform system tightness tests.
Details the connection and charging procedure for the instrument's battery.
States that the device is supplied with a calibration certificate.
Provides information on the instrument's electromagnetic compatibility compliance.
Explains how to connect the instrument to a PC via USB or Bluetooth.
Details the instrument's Bluetooth capabilities for remote connectivity.
Lists available software and applications for instrument management.
Illustrates and describes the front panel components of the instrument.
Illustrates and describes the back panel components of the instrument.
Details the various input connectors for probes and accessories.
Covers initial steps before using the instrument, like unpacking and checks.
Explains how to power the analyzer using its internal battery or external adapter.
Describes the procedure for turning the instrument on and off.
Explains the instrument's home page interface and its main functions.
Provides important warnings regarding operating temperature and instrument care.
Illustrates the correct positioning of the instrument during measurement.
Diagram showing connections for smoke and air temperature probes.
Diagram for connecting probes for comprehensive flue gas analysis.
Explains the connection procedure for the Pitot tube for air velocity measurement.
Details the connection of the kit for performing tightness tests.
Illustrates the connection of the instrument to a PC.
Crucial warnings for performing accurate flue gas analysis.
Guides on powering on the instrument and initiating auto-calibration.
Instructions on correctly inserting the smoke probe into the stack.
Explains how to configure primary parameters for analysis.
Details the available parameters for configuring combustion analysis.
Procedure for starting and ending combustion analysis in manual mode.
Steps to initiate automatic combustion analysis based on standards.
Procedure for concluding automatic combustion analysis.
Covers the final steps and checks after completing a combustion analysis.
Instructions for checking and maintaining the water trap/smoke filter unit.
Procedure for measuring the stack draft.
Details on performing black smoke measurements.
Explains how to measure ambient CO for safety.
Describes how to measure supply and return water temperatures.
Details how to measure system pressure.
Explains measuring network gas pressure.
Covers testing ventilation openings and pressure differentials.
Explains how to perform system tightness tests.
Allows configuration of instrument settings like Bluetooth, time, and language.
Enables selection and management of instrument operators.
Provides information about the instrument and help center contacts.
Enables checking instrument status and diagnosing anomalies.
Allows adjustment of autozero and cleaning cycle durations.
Covers selecting and configuring the printer for reports.
Allows configuration of test report format, copies, and layout.
Shows the list of enabled/disabled measurements for printing.
Prints a test ticket to verify printer operation.
Function to advance paper in the printer.
Explains how to organize and view saved analyses in the archive.
Allows renaming of archive folders.
Provides instructions for deleting archive folders.
Instructions for updating the instrument's firmware.
Details recommended annual service and overhaul procedures.
Covers regular maintenance tasks for instrument longevity.
Information on expanding instrument capabilities by adding sensors.
Shows the location and numbering of gas sensors within the instrument.
Details the CxHy sensor for unburnt hydrocarbon measurement.
Explains the CO2 sensor for measuring carbon dioxide levels.
Describes the sensor for detecting combustible gas leaks.
Provides the physical dimensions of the analyzer.
Details the dimensions of the instrument's case.
Lists available spare parts for the instrument.
Lists optional accessories for the instrument.
Provides contact information for authorized service centers.
To Next Page
