4. Operational procedures
4.1 Preparation
I. Make sure that paint hose, return hose,
airless gun and nozzle tip are all
properly connected. Do not connect Oil gauge
suction hose yet. _ /"-_-'N, oil gauge
any oil,
_ _fnormal oil levek
4. If V-belt is slack, adjust to an (_ _,_
appropriate tension.
(Oil the Super KI01G) place your
lingeronthemiddleofthebelt
andpressfirnfly.Adjustuntilslackis _ o _ 6 lira
about 5-6ram. However,
ne_er do this while in operation.
tl OPM 101198
To Next Page
Loading...