To Next PageTo Next Page
Need help?Do you have a question about the Seiwa S 60E and is the answer not in the manual?
General| Brand | Seiwa |
|---|---|
| Model | S 60E |
| Category | Paint Sprayer |
| Language | English |
Steps for preparing the airless spray unit before operation, including hose connections and oil checks.
Procedures to verify correct functioning after setup, including suction checks and pressure valve adjustments.
How to start spraying, involving pressure control, relief valve, and gun operation.
Instructions for temporarily pausing or completely stopping the equipment safely.
Steps for safely shutting down the unit and performing basic cleaning.
Guidance on aiming, speed, distance, and handling the airless spray gun.
Instructions for using the clamp knob for spray lock and safety lock functions.
Recommendations for selecting nozzle tip sizes based on coating type and viscosity.
Procedure for draining old oil and refilling the unit with the correct type and volume of new oil.
Steps for safely removing the paint cover and replacing the diaphragm set.
Instructions on how to remove and replace the discharge/outlet valve using specific tools.
Procedure for replacing the suction valve, ensuring the gasket is properly seated.
Common problems with suction, uptake, pressure, and oil contamination, with causes and actions.
List of parts associated with optional accessories for the spray unit.
