PoolDose | pH · ORP · Chlorine
0000138994 rev. 1.1 EN
1. PACKAGE CONTENT
*NOTE: The values from the table represent the number of items inside the package.
(*
1
Five pieces for the WiFi model only)
(*
2
One piece for the WiFi model only)
A: PVC Crystal 4x6
suction hose (4 m)
B: Polyethylene
delivery hose (5m)
C: FPM Lip valve
(3/8” GAS)
D: PSS3 probe-
holder (1/2” GAS)
E: Tapping saddle
(f=50mm)
F: Reducer for
injection valve
(1/2” M to 3/8” F)
G: Foot filter
(PP riser)
H: Mounting bracket
kit (f=6 mm screws)
O: Probes holder +
Chlorine probe
P: Filter Minor (5”) +
PSS3 probe-holder
(1/2” GAS)
Q: Cleaning brush
chlorine probe
R: Balls for chlorine
probe
U: 465 mv Calibration
solution
WARNING!
Before carrying out ANY work inside control panel of the PoolDose
device, make sure you disconnect it from the power supply.
Failure to comply with the instructions contained in this manual
could cause injury to people and/or damage to the appliance and the
system.