Date Code 20000525 SEL-2600 RTD Module
SEL-2600 RTD Module
Instruction Manual
Features & Benefits
Transmit 12 RTD-based temperature measurements and a single contact status
up to 500 meters using inexpensive fiber-optic cable with the SEL-2600 RTD
Module. The SEL-2600 connects directly to the SEL-701 Motor Relay using fiber-
optic connectors built into each device and also connects to the SEL-2030 Commu-
nications Processor using a single SEL-2800 Fiber-Optic Transceiver. The fiber-
optic link eliminates expensive cable pulls and provides electrical noise immunity
and ground isolation.
➤ Measure up to 12 RTD temperatures plus one contact input with
zero settings.
➢ 100-ohm platinum
➢ 100-ohm nickel
➢ 120-ohm nickel
➢ 10-ohm copper
➤ LEDs indicate device status, transmit status, and contact
input status.
➤ Power from 120 Vac or 240 Vac.
➤ Operates in extreme ambient temperatures from –40º to +85ºC.
To Next Page
Need help?
General
