Page 8
FOOTSWITCH FUNCTIONS
HOW TO ALLOCATE
- Access the Global Menu by holding both knobs down
- Scroll to “Foot Func” with the Preset/Edit Knob
- Click the Preset/Edit Knob to open the “Foot Func” menu
- Scroll to and click with the Preset/Edit Knob on the footswitch you would like to edit
- Scroll to with the Preset/Edit Knob to “Tapping” or “Holding”
- Scroll with the Tempo/Save Knob to choose the function
LIST OF FUNCTIONS
We are adding more functions all the time, but here is the current list:
TAP TEMPO - Consecutive taps will set a new tempo.
NEXT PRESET - This will take you to the next preset in the setlist.
TGL CLK IN - Toggle whether the Quartz ignores or receives incoming MIDI Clock.
TGL AUDIO IN - Toggle whether the Quartz ignores or receives an incoming audio metronome.
CUSTOM MIDI - Sends a stack of 20 custom MIDI messages (defined within the computer software).
TGL REPEAT - Starts or stops the custom repeating MIDI message. A message sent every quarter note.
TGL CLK OUT - Starts or stops the sending of MIDI Clock.
TGL AUX - Starts or stops the sending of tap signals from the 4 Aux outputs.
TGL ALL TIME - Starts or stops the sending of tempo data from MIDI Clock, the 4 Aux outputs, and the repeating MIDI
message, all at once.
RCL PRESET - Will take you to a specific preset. Whether the preset is in the setlist or not (defined within the computer
software).
PREV PRESET - Will take you to the previous preset in the setlist
To Next Page
Loading...