Need help?Do you have a question about the Selco Genesis 3200 GSM and is the answer not in the manual?
Lists EU directives the equipment conforms to, including Low Voltage and EMC Directives.
Lists the harmonized standards applied to the equipment, such as EN 60974 series.
Specifies environmental conditions for equipment use, including temperature, humidity, and dust.
Details personal protective equipment and safety measures for users and bystanders.
Advises on protection from welding fumes and gases, and importance of ventilation.
Details measures to prevent electrical shock, including insulation and earthing.
Details the required connections for power supply and gas fitting.
Details the adjustable setup parameters for MMA welding, including Hot Start and Arc Force.
Lists and explains the setup parameters specific to TIG welding, such as Pre-gas and Initial current.
Details the setup parameters for MIG/MAG and Pulsed MIG welding, including Post-gas and Pulsed slopes.
Lists and explains various alarm codes and their corresponding types.
Outlines the recommended routine maintenance tasks for the system.
Provides guidance on identifying and resolving common problems.
Addresses issues related to the system not producing welding output power and wire feed problems.
Covers problems with the wire feeder and inconsistent wire feeding.
Lists detailed technical data for the Genesis 3200 GSM, including power, duty cycle, and ratings.
General| Input Current | 16 A |
|---|---|
| Protection Class | IP23 |
| Rated Input Current | 16 A |
| Efficiency | 85% |
| Input Voltage | 230V |
| Power Supply | Single Phase |
To Next Page