Selec PID330

Heat-cool mode
The controller can be operated
in heat-cool mode if this
selection is YES.
Zone PID
Main Output
SSR Output SSR output
model
Display
Name & Description
Range
Display
condition
Default
value
7. LEVEL 4 - SPECIAL FUNCTIONS
/
Soft start time
Hand output percentage
Ramp mode
Ramp rate
Soak time
Sensor open condition
Sensor fail power level
PV bias (Display Offset)
PID control
PID control
Ramp mode
=ON/HOLD.
Ramp mode
=ON/HOLD.
PID control
Sensor open
condition =
MANL.
25
/
/
/
(
(
, to
minutes.
,O/P
power low
limit to O/P
power high
limit.
/
/
to
degree/hour.
minutes
to
/
to %;
- to %
in case of
heat-cool
mode.
to
+ for TC
(RTD) &
+ for
AIN models
decimal point
as per
selected.
to
Programming