TEC Series v 3.2X
Page 40
SETTING TIME / DATE continued
END MIN 59
Enter the ending minute. This is a 1 or 2 digit number between 00 and
59. If you make a mistake, press "0" and "#" simultaneously to
backspace one character. After the end minute is entered, press the
“*” key.
The table below may be used to help keep track of which Time Zones are required for this installation.
Writing them down in the table provided will help reduce programming entry errors.
DAYS 12345678
Enter the desired day(s). Do this by keying in the number
corresponding to the day of the week (1 = Sunday, 7 = Saturday and 8
= Holidays). As an example Monday through Friday would be keyed
in as 2, 3, 4, 5 and 6. Days may be entered in any order. If you make
a mistake, press "0" and "#" simultaneously to backspace one
character. After all days are chosen, press the “*” key.
Start Time Stop Time Day of the Wee
Time Hour Min. Hour Min. SU MO TU WE TR FR SA HO
0
1
2
3
4
5
6
7
SETUP AND PROGRAMMING
To Next Page
Loading...