EasyManua.ls Logo

Selecta INCUBAT 19L - Equipment Description; Technical Features; Installation

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTRUCTIONS MANUAL CODE 80021 REV F May/2012 (It can be modified without notice) Page.: 12
J.P. SELECTA s.a. Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España Tel 34 93 770 08 77 Fax 34 93 770 23 62
e-mail: selecta@jpselecta.es - website: www.jpselecta.es
2000009
PROGRAMMABLE TIMER OF 24 HOURS 2000009
For continuous cycle with on-off switch levers that can be operated every
15 minutes.
EQUIPMENT DESCRIPTION
INCUBAT incubators are designed for bacteriological culture. The heat
distribution is produced by natural convection. The incubator is provided
with a tempered glass inner door that allows the visualization without
lost of temperature.
TECHNICAL FEATURES
Voltage supply 115-230 V 50/60 Hz as indicated on the machine
characteristics plate.
* Measured according to the measurement procedure of J.P. SELECTA, s.a.
2000205 2000206 2000207 2001615 2000994
Power (W) 165 245 315 275 535
Capacity (L) 19 36 80 52 150
Max temperature 80ºC
Spatial variations* ±2ºC
Stability* ±0,4ºC
Thermometer error ±5ºC
Weight (Kg) 26 36 54 46 78
Height 30 40 50 33 50
Inner dimensions Width 25 30 40 47 60
(cm) Depth 25 30 40 33 50
Height 50 60 70 53 70
External dimensions Width 60 65 74 82 95
(cm) Depth 44 49 59 52 68
INSTALLATION
Put the incubator on a flat horizontal, level surface, leaving a space of
about 10 cm at the back of the machine.
Do not install the incubator near sunny or heating places.
For an optimum function, the ambient temperature must not be over
30ºC.

Related product manuals