Selecta VACIOTEM-T - Page 33

INSTRUCTION MANUAL CODE 80152 REV E DEC 2019 (They can be modied without notice) Page: 33
J.P. SELECTA s.a.u. Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España Tel 34 937 700 877 Fax 34 937 702 362
e-mail: selecta@jpselecta.es - website: www.grupo-selecta.com
Read commands
COMMAND CONCEPT MESSAGE ANSWER
PVT? Temperature PV (ºC) #NNPVT?KK<CR><LF> #NN+000KK<CR><LF>
PVP? Pressure PV (mbar) #NNPVP?KK<CR><LF> #NN0000KK<CR><LF>
SVT? Temperature set (ºC) #NNPVT?KK<CR><LF> #NN+000KK<CR><LF>
SVP? Pressure Set (mbar) #NNSVP?KK<CR><LF> #NN0000KK<CR><LF>
RUN? Device status #NNRUN?KK<CR><LF> #NNRUNKK<CR><LF>
ID? Device identity #NNID?KK<CR><LF> #NN>KKKKKKKVKK<CR><LF><CR><LF>
SAL? Alarms status #NNSAL?KK<CR><LF> #NNALARM0KK<CR><LF>
TBY? Standby time #NNTBY?KK<CR><LF> #NN00,0KK<CR><LF>
TBR? Standby Run time #NNTBR?KK<CR><LF> #NN00,0KK<CR><LF>
TRU? Run time #NNTRU?KK<CR><LF> #NN0,00KK<CR><LF>
Alarm status
ALARM CONCEPT ANWER
0 Any alarm #NNALARM0KK<CR><LF>
1 Overtemperature #NNALARM1KK<CR><LF>
2 Power fail #NNALARM3KK<CR><LF>
* The write error commands are on the error table.