Select.live setup for Internet connection
1. Turn ON the SP PRO. After a minute, you should see the following message on the screen of your
Select.live
2. From your computer or mobile, connect to the Select.live using Wi-Fi SSID: “selectronic” with no
password.
3. To setup the Select.live, open a web browser and enter http://192.168.1.1. The web link will then
direct you to the Select.live setup web interface.
4. Click on the “Setup Wizard” button to auto-detect the SP PRO. Select your preference of Wi-Fi or
Ethernet connection. If Wi-Fi is selected, then provide your Wi-Fi SSID and password to connect
the Internet.
If Ethernet is selected, choose DHCP Enabled ON or OFF. For DHCP Enabled OFF, you must
provide static IP, Netmask, Gateway and DNS address to connect to the Internet.
To Next Page
Loading...
