What to do if my SellEton Scales Measuring Instruments show 'ERR3'?
If your SellEton Scales Measuring Instruments display 'ERR3', you should: * Check all wire connections. * Check the load cell. * Recalibrate the device. If these steps don't resolve the issue, a PCB replacement may be needed.
Why do SellEton Scales SL-7516 display 'UUUUUU'?
The 'UUUUUU' error on your SellEton Scales Measuring Instruments could be due to several reasons: 1. **Overload:** The weight on the scale exceeds its capacity. Reduce the weight. 2. **Wrong connection with load cell:** There is a problem with the load cell connection. Check the load cell connection. 3. **Load cell has quality problem:** The load cell itself might be faulty. Inspect the load cell and check the input/output.
What to do if my SellEton Scales Measuring Instruments display 'nnnnnnn'?
If your SellEton Scales Measuring Instruments display 'nnnnnnn', possible causes include: 1. **Calibration is no good:** Ensure the scale is level. 2. **Wrong connection with load cell:** Check the load cell connection. 3. **Load cell has quality problem:** Check the load cell input and output resistance.
What does 'ERR2' mean on SellEton Scales Measuring Instruments, and how to fix it?
The 'ERR2' error on SellEton Scales Measuring Instruments indicates that the calibration weight minimum is 10% of the max capacity set in C04. It is recommended to use 60%-80% of max capacity if possible.
How to fix 'ERR5' on SellEton Scales Measuring Instruments?
To resolve the 'ERR5' error on SellEton Scales Measuring Instruments, change the PCB.
General| Brand | SellEton Scales |
|---|---|
| Model | SL-7516 Series |
| Category | Measuring Instruments |
| Language | English |
To Next Page
