EasyManua.ls Logo

Selmo Galaxy Pro - Eco Mode

Selmo Galaxy Pro
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Selmo Electronic
Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel 049.8976761, Fax 049.8976085 -
Selmo Electronic
Via Pacinotti, 24 - 35030 Rubano www.selmo.it
EN
Rev.01 - Aug. 2018Pg. 7
Selmo
Comfort technology division
Antifreeze Mode
In "Antifreeze" mode the device activates the heating element when the towel
radiator temperature falls below °C. It is suggested to set this operating mode10
when the room is not occupied for several days.
- Press the key until the display shows the "Antifreeze" icon.[Mode]
Boost 2h Mode
The "Boost 2h" can be used for quickly warming the room.
-To activate the “Boost 2h” mode, press the corresponding key until the "2h" icon is
displayed.
To exit this mode, press either the key, the key or the[Boost 2h] [On/Stand-by]
[Mode] .key
For safety reasons, the temperature will be automatically limited to 70°C.
Key lock
This function allows locking the buttons of the device to avoid inadvertent
modifications of the settings.
All the keys are disabled except the button.[On/Stand-by]
Press together the and keys for 3 seconds to activate this mode.[Mode] [+]
To unlock the buttons repeat the procedure.
ECO Mode
In this mode, you select a preset temperature level of the towel, amounting to 50 ° C
(fixed), independently by the other device settings. This function allows reducing the
energy consumption.
To activate/deactivate the “ECO mode, press the corresponding key[ECO] .
“Galaxy Pro”
Remote control for chronotermostat