Selmo Thesis Easy - Status Indicators and Warranty; LED Status Meanings; Warranty and Service

Pg. 8
Backlit on/off button
STATUS
Red led ON
Heating element turned on.
Blue led ON
Power rating reached
heating element turned off.
Switched off
"Stand-by" mode active.
Blinking
Red/Blue
Error message. The
heating element is
turned off. Contact
assistance.
* The duration of the first "Comfort" cycle is of 21h.
** The duration of the first "Comfort" cycle is of 9h.
Repairs carried out by unauthorized personnel invalidate warranty.
The manufacturer reserves the right to make any changes to the
product
described in this
manual, at any time, and without prior warning.
Blinking red
"Boost" mode active. The heating
element remains active for 2h. For
safety reasons, the maximum
temperature is of 3 °C.7
Control Led
Blinking
green
"Boost" mode active (Timer 24). The
heating element remains active for
2h. For safety reasons, the
maximum temperature is of 3 °C.7
Permanent
green
Back to " " mode for 22h.Off
*
Blinking
amber
"Boost" mode active (Timer 12). The
heating element remains active for
2h. For safety reasons, the
maximum temperature is of 3 °C.7
Permanent
amber
Back to " " mode for 10h.off
**
“Thesis Easy”
Electronic Control for Towel Heaters
Comfort technology division
Selmo
Selmo Electronic
Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel 049.8976761, Fax 049.8976085 -
Selmo Electronic
Via Pacinotti, 24 - 35030 Rubano www.selmo.it
EN
Rev. 01 - Oct. 2018