Pg. 1
The electric resistance is not powered and all
lights are turned off.
"Timer" mode:
This operating mode cyclically repeats every 12 or
24 hours the “Boost” mode.
White
Chrome
THESIS is compliant with the followingEASY
standards:
-Eco-design Directive for Energy-using Products,
2005/32/EC (<0,5W).
-EN 60335-1:2012
-EN 60335-2-30:2011
-EN 60335-2-43:2008
-EN 61000-3-2:2004 - EN 61000-3-3:1995
-EN 55014-2:1998 -EN 55014-1:2008
-EN 50366:2003
Functions
Four operational modes:
"Comfort", "Boost", "Stand-by", "Timer"
•
"Comfort" mode:
•
•
•
"Boost" mode:
In “Boost” mode the heating element is activated
for a period of 2 hours. During this time interval,
the electrical resistance warms the room
independently of the configured “Comfort”
settings. The temperature is however
automatically adjusted in order not to exceed
3 °C. At the end of the 27 hours period, the device
returns to previous operational mode.
“Stand-by" mode:
THESIS EASY is a special device that controls the
power output of the heating element between 20% and
100% by acting on the rotation of the knob. An
important element for the safety of people is the useful
presence of the NTC sensor which prevents the
ambient temperature from exceeding 37° C, in
compliance with European legislation. It can be
assembled with different heating elements that can be
easily found or replaced by the major European
manufacturers.
The thermostat manage power of heating
resistance in percentual of time between 20%
amd 100% (MAX).
“Thesis Easy”
Electronic Control for Towel Heaters
Comfort technology division
Selmo
Selmo Electronic
Via Pacinotti, 24 - 35030 Rubano www.selmo.it(PD) Italy- Tel 049.8976761, Fax 049.8976085 -
Selmo Electronic
Via Pacinotti, 24 - 35030 Rubano www.selmo.it
EN
Rev. 01 - Oct. 2018
To Next Page
Need help?
General
