Selmo Thesis Plus User Manual

Comfort technology divisio
n
“THESIS PLUS”
E
lectronic control for towel radiator
s
Selmo Electronic
Via Pacinotti, 24 - 35030 Rubano (PD) Italy- Tel +39.049.8976761, Fax +39.049.8976085 - www.selmo.it
E
N
Rev.13 November 2015
White
The electric resistance is not powered and all
lights are turned off.
x "Timer" mode:
This operating mode cyclically repeats every 12 or
24 hours the “Boost” mode.
Chrome
THESIS Plus is an electronic thermostat for the control electric towel radiators.
By means of an external sensor it is capable of
keeping the room temperature at the desired value.
THESIS Plus has a simple yet modern design,
suitable for every type of furnishing and every
model of electric towel radiator.
THESIS Plus is easy to install and it is available in
several colors.
THESIS Plus is a certified product.
THESIS Plus is compliant with the following
standards:
-Eco-design Directive for Energy-using Products,
2005/32/EC (<0,5W).
-EN 60335-1:2012
-EN 60335-2-30:2011
-EN 60335-2-43:2008
-EN 61000-3-2:2004 - EN 61000-3-3:1995
-EN 55014-2:1998 -EN 55014-1:2008
-EN 50366:2003
Functions
Four operational modes:
"Comfort", "Boost", "Stand-by", "Timer"
• "Comfort" mode:
The thermostat keeps the room temperature at
the value set by the user (through the knob). In
this modality the device can be remotely
controlled through the "Fil-Pilote" system.
• "Boost" mode:
In “Boost” mode the heating element is activated
for a period of 2 hours. During this time interval,
the electrical resistance warms the room
independently of the configured “Comfort”
temperature. The temperature is however
automatically adjusted in order not to exceed
32°C. At the end of the 2 hours period, the device
returns to previous operational mode.
• "Stand-by" mode:

Selmo Thesis Plus Specifications

General

Brand	Selmo
Model	Thesis Plus
Category	Controller
Language	English

Summary

Introduction to Thesis Plus

Product Overview

Introduces the Thesis Plus as an electronic thermostat for towel radiators with a modern design.

Operational Modes

Details the four operational modes: Comfort, Boost, Stand-by, and Timer.

Technical Specifications

Electrical and Performance Data

Covers supply voltage, power, operational range, IP rating, and sensor type.

Standards and Certifications

Lists compliant standards, certification marks (CE), and environmental compliance.

Available Options

Details power cable, electric plugs, and available colors.

Temperature Adjustment Graph

Illustrates temperature fluctuation in a graph for a specific setting and cold wall condition.

Important Safety Warnings

General Precautions

Emphasizes electric shock risk, proper usage, voltage checks, and compatible heating elements.

Handling and Maintenance

Covers procedures for damaged cables, storage, transport, and replacement of heating elements.

Installation and Cleaning Guide

Installation Steps

Provides step-by-step guidance for installing the thermostat on a towel radiator.

Component Identification

Labels the various parts of the heating element and thermostat for installation reference.

Cleaning Procedures

Outlines the correct method for cleaning the device using gentle agents.

Installation Steps and Disposal

Pre-Installation Checks

Lists crucial checks like radiator condition, voltage, and heating element compatibility before installation.

Connection and Mounting

Details physical connection of cables, O-ring placement, and securing the thermostat.

Product Disposal Guidelines

Explains proper disposal according to WEEE directives for environmental protection.

Fil-Pilote System Integration

System Connection Diagrams

Shows wiring diagrams for connecting the thermostat to a Fil-Pilote system.

Class I vs. Class II Wiring

Differentiates connection requirements for Class I (standard) and Class II (Fil-Pilote) devices.

Fil-Pilote Signal Modes

Lists and describes the six signal types used by the Fil-Pilote system.

User Manual and Quick Reference

Device Feature Highlights

Summarizes key design features like water protection, small size, and external sensor.

Control Interface Explained

Describes function of backlit buttons, LEDs, and the knob for temperature and mode activation.

Quick Guide to Timer

A visual guide on how to activate timer functions using the control knob.

Operating Modes and Controls

On/Stand-by Operation

Explains how to switch between Stand-by and Comfort modes using the button.

Knob Functions for Modes

Details temperature setting via knob rotation and activating Boost/Timer modes via the knob button.

Timer Mode Activation

Describes activating Timer-24h and Timer-12h modes and their behavior.

Operational States and Indicators

Functional State Diagram

Visualizes thermostat operating states: Stand-By, Comfort, and Boost modes.

Backlit Button Status

Interprets status indications of the backlit button (ON/OFF, error states).

'Boost' LED Indicators

Explains the meaning of the 'Boost' LED for various Boost and Timer mode activations.