To Next PageTo Next PageWhat to do if Selve Accessories awning does not retract at heavy winds?
If your Selve Accessories awning isn't retracting during heavy winds, the sensitivity level might be set too high. Try setting smaller values at the step switch. Also, ensure that the sensor is programmed correctly.
Why does my Selve Accessories awning retract at low winds?
If your Selve Accessories awning retracts even in low winds, it's likely that the sensitivity level is set too low. To resolve this, set higher values at the step switch.
What to do if Selve commeo Wind Sensor awning can not be driven by the TOGGLE button of the sensor?
If your Selve Accessories awning cannot be operated using the TOGGLE button on the sensor, the batteries are likely empty. Replace the batteries to resolve this issue.
Explains how the sensor detects wind and retracts the awning.
Steps to program the wind sensor to the awning motor.
Steps to adjust and test wind sensitivity settings.
Steps to adjust and test tilt angle detection.
Lists common problems and their solutions.
Explains how the sensor detects wind and retracts the awning.
Steps to program the wind sensor to the awning motor.
Steps to adjust and test wind sensitivity settings.
Steps to adjust and test tilt angle detection.
Lists common problems and their solutions.
General| Brand | Selve |
|---|---|
| Model | commeo Wind Sensor |
| Category | Accessories |
| Language | English |
