'"
Troubleshooting
4ROUBLESHOOTING
Problem Cause Solution
Awning retracts already at low
winds
Sensitivity level set too low Set higher values at the step switch
Awning does not retract at heavy
winds
Sensitivity level set too high Set smaller values at the step
switch
Sensor is not programmed Program of sensor
Awning can not be driven by the
TOGGLE button of the sensor
Batteries empty Change batteries
3%,6%3ERVICE(OTLINE
o(OTLINE0HONE
o$OWNLOADTHEOPERATINGMANUALS
ATWWWSELVEDEOR12SCAN
To Next Page
Loading...