To Next PageTo Next PageHow to fix Selve Accessories when the drive is not functioning and the control light is not lit?
If the Selve Accessories drive isn't working and the control light is off, the batteries might be dead or inserted incorrectly. Try inserting new batteries or ensuring the batteries are correctly inserted.
Why is the control light flashing on my Selve i-R Accessories?
If the Selve Accessories control light is flashing, it means the batteries are running low. Replace them with new ones.
What to do if Selve i-R drive is not functioning, but the control light is lit?
If the Selve Accessories drive isn't working but the control light is on, the receiver may be out of radio range, or the transmitter isn't programmed into the receiver. Try reducing the distance to the receiver or programming the transmitter.
Why is the control light flashing permanently on my Selve Accessories?
If the control light on your Selve Accessories is flashing permanently, the TEST MODE is active. You should deactivate TEST MODE.
What to do if Selve i-R roller shutter does not move down during sunlight hours?
If the Selve Accessories roller shutter doesn't move down during sunlight hours, it could be because the i-R Light Sensor is in manual mode, and the sun threshold value isn't exceeded. Press the manual/automatic button repeatedly until the control light lights up green and adjust the sun threshold value.
Why the i-R Light Sensor does not execute any automatic control commands in Selve Accessories?
If the i-R Light Sensor isn't executing automatic control commands on your Selve Accessories, it might be set to manual mode. Press the manual/automatic button repeatedly until the control light lights up green.
General| Brand | Selve |
|---|---|
| Model | i-R |
| Category | Accessories |
| Language | English |
Overview of the i-R Light Sensor's functionality and capabilities.
Specifies the intended applications for the i-R Light Sensor.
Guidance on selecting the optimal mounting position for the sensor.
Step-by-step instructions for opening the device housing.
Details the operational purpose and benefits of the i-R Light Sensor.
Explains how to enter and utilize the device's setting mode.
Describes how the sensor manages sun protection based on threshold values.
Explains the sensor's operation for twilight detection and control.
Details the function of the broken glass sensor and its effect on the shutter.
Illustrates different operational modes of the i-R Light Sensor via diagrams.
How to activate and use the test mode for the i-R Light Sensor.
Functionality and usage of the manual/automatic control button.
Explains the meaning of different control light indications and signals.
Step-by-step guide to program the sensor with an existing transmitter.
Procedure for programming the sensor when no prior transmitter is learned.
Instructions on how to remove a programmed i-R Light Sensor from the receiver.
Steps to reprogram the sensor when a transmitter is lost or malfunctioning.
Instructions for replacing the battery in the i-R Light Sensor.
Guidelines for cleaning and maintaining the i-R Light Sensor.
Provides specifications and technical details of the i-R Light Sensor.
Declaration of the product's conformity with relevant directives.
