To Next PageTo Next PageWhat to do if Selve i-R Multi Send/ i-R Multi Send Plus Remote Control does not carry out the switching commands?
If your Selve i-R Multi Send/ i-R Multi Send Plus isn't executing switching commands, ensure that the sliding switch is set to automatic. If it's on manual, move the sliding switch to automatic.
What to do if Selve i-R Multi Send Remote Control motor is not functioning and transmission control light is not lit?
If the motor on your Selve Remote Control isn't working and the transmission control light is off, the batteries might be dead (insert new batteries) or inserted incorrectly (insert batteries correctly).
What to do if Selve i-R Multi Send transmitter does not react after the batteries have been changed?
If your Selve Remote Control transmitter isn't responding after a battery change, the power supply may have been interrupted for too long. Press the RESET button and check the settings.
What to do if Selve i-R Multi Send/ i-R Multi Send Plus Remote Control does not carry out the switching commands precisely?
If your Selve i-R Multi Send/ i-R Multi Send Plus isn't executing switching commands precisely, the holiday function may be switched on. Switch the holiday function off.
General| Brand | Selve |
|---|---|
| Model | i-R Multi Send |
| Category | Remote Control |
| Language | English |
General explanations of device functions and terms used.
Explains the function of the manual and automatic sliding switch.
Describes the function and indicators of the transmission control light.
Explains the concept of controlling multiple receivers simultaneously.
Details how to select channels or the central unit using the group selector.
Details how to navigate and use the device's operating mode.
Explains how the OK button saves displayed values.
Describes operations possible with the +/- buttons for navigation and value changes.
Explains how to access menu overviews and the operating mode.
Describes how to reset the device to its default settings.
Instructions for setting the device's current time and date.
Overview of setting two different switching times: Astro Evening and Individual.
Selecting channels for setting switching times, only with Expert Mode ON.
Details how the device controls up/down based on switching time and sunset.
Sets the up and down control commands according to the switching times you have set.
Prevents early up/down movement of the roller shutter due to the astro evening function.
Defines automatic up and down times for roller shutters and blinds.
Lists available settings like Holiday, Intermediate Position, and more.
Simulates an occupied house when the user is on holiday.
Describes the upper or lower position where the shutter/blind stops.
Allows setting a freely selectable position between the upper and lower end limits.
Sets a free position for ventilation slits or slat turning.
Allows the user to select their preferred language.
Enables shifting the astro time by a specified amount (e.g., +/- 120 minutes).
Selects a city to ensure accurate astro function timing based on location.
Allows precise location and time zone configuration for advanced users.
Manages automatic adjustment for daylight saving time changes.
Menu reserved for qualified personnel for specific settings.
Provides a visual overview of the device's main operating modes.
Step-by-step guide to setting the current time and date on the device.
Instructions for setting up automatic up/down times based on switching and blocking times.
Guide to setting custom up and down switching times for weekdays and weekends.
Specific instructions for programming Astro Evening for the Multi Send Plus in Expert Mode.
Instructions for setting individual switching times for Multi Send Plus in Expert Mode.
How to activate or deactivate the holiday function for simulated home presence.
Guide to programming specific positions like intermediate, ventilation, and end limits.
Adjusting language preference and the astro time shift.
Configuring location-specific settings for the astro function in expert mode.
Enabling or disabling automatic time adjustment for daylight saving.
Settings for roller shutter/blind selection, expert mode, and initial setup.
Step-by-step guide to learning transmitters into the receiver.
Initial setup and learning of transmitters for the end user.
Process for adding more transmitters to an already configured receiver.
How to remove previously programmed transmitters from the receiver.
Instructions for teaching the receiver specific intermediate and ventilation positions.
Guide to setting the intermediate position starting from the upper end limit.
Guide to setting the ventilation position starting from the lower end limit.
Instructions for opening the compartment and replacing batteries.
Guidance on cleaning and maintaining the device.
Lists key technical specifications like voltage, type, and frequency.
Statement of compliance with relevant EU directives.
