SEM 200 - Page 15

semshred.com | 508.366.1488
15
Tools and PPE Required:
• Cut resistant gloves
• 7/16”, 1/2” wrench or socket wrench
• 5/16” Allen drive socket bit
• 4-6” socket wrench extension
• Torque wrench compatible with sockets listed above
• .001” feeler gauge
Spare Knives and Sharpening: To avoid downtime, it is always best to have a spare set of sharp knives
on hand. SEM offers spare knives and sharpening services. Contact SEM customer service at 1-800-225-
9293.
Screen: It is recommended, but not required, to remove the screen from the chamber while changing
the knives.
Front deflector
Front bed knife clamp
Bed knife
Rear deflector
Rear bed knife clamp
Drive plate
Figure 6.7: Exploded chamber
Bed knife