semshred.com | 508.366.1488
3.) Installation Instructions
3.1 Location
The disintegrator can be placed in an office area within six feet of a wall receptacle with a dedicated
line. It is recommended that the machine be three to four inches away from the wall for proper
ventilation.
1) Place vacuum cabinet next to the disintegrator cabinet (on the left side) so the handles are next to
each other. Open doors on the cabinets and feed vacuum hose through hole in the bottom of the
right side of cabinet and connect to the transition in the disintegrator cabinet.
2) Plug vacuum cabinet into the back of the disintegrator cabinet. For the DS-200, the shredder will
be plugged in when received.
Shredder plug for
DS-200 ONLY
To Next Page
Loading...