7
For NATIONWIDE SERVICE Call 1(800)225-9293
OPERATION
When Using for the first time the oil pump starts
automatically:
•Press after approximately 15 seconds and a red blinking
LED (A) disappears.
When the oil bottle (B) is changed:
•Press the rocker switch “R” until the LED (A) no longer
blinks red.
Flashing LED (A):
•Cutting shafts are automatically oiled.
Warning:
Materials other than common office paper may jam and /or
damage the cutting unit. Paper clips and staples should be
removed from material being destroyed to prolong life and
trouble-free operation of the cutting unit.
To Next Page
Loading...
