Need help?Do you have a question about the Semtech SX1262 and is the answer not in the manual?
Connect the development kit to your PC using mini-USB cables for power and communication.
Overview of the welcome screen, test modes (Ping Pong, PER), and settings access.
Conventions for touch screen navigation, including color coding for menus and data.
Steps to check, download, and upload the latest firmware to the development kit.
Configure LORA modulation parameters like Spreading Factor, Bandwidth, and Coding Rate.
Configure GFSK modulation parameters like bitrate, frequency deviation, and filtering.
Set and tune the radio frequency for selected modulations, including preset options.
General| Frequency Range | 150 MHz to 960 MHz |
|---|---|
| Modulation Types | LoRa, (G)FSK, (G)MSK, BPSK |
| Output Power | Up to +22 dBm |
| Supply Voltage | 1.8 V to 3.7 V |
| Interface | SPI |
| Operating Temperature | -40°C to +85°C |
| Sensitivity | -137 dBm |
| Data Rate | up to 300 kbps (FSK) |
| Package | 24-pin QFN |
To Next Page
