Sena 50S - Using Mesh in Group Mesh; Creating a Group Mesh

50S Motorcycle Bluetooth
®
Communication System with Mesh Intercom™ | 31
7 MESH INTERCOM
Note:
• Channel Setting always starts with channel 1.
• If you do not press any button for approximately 10 seconds in a
specific channel, the channel is automatically saved.
• If you want to cancel during Channel Setting, tap the Phone
Button.
• The channel will be remembered even if you turn off the 50S.
7.4 Using Mesh in Group Mesh
7.4 .1 Creating a Group Mesh
Creating a Group Mesh requires two or more Open Mesh users.
A C
B D
Open Mesh
1. Enter into Mesh Grouping to create a Group Mesh.
C
YOU
and
=
M
5s
HOLD
D
FRIEND
“Mesh grouping”