Need help?Do you have a question about the Sena R1 and is the answer not in the manual?
General| Integrated Intercom | Yes |
|---|---|
| Microphone | Built-in |
| Charging Time | 3 hours |
| Operating Temperature | -10°C - 55°C (14°F - 131°F) |
| Compatibility | Works with most Bluetooth-enabled devices |
Information on the Quick Start Guide, full User's Guide, and firmware updates.
Lists Sena's social media channels for product announcements and tips.
Identifies buttons and speakers on the helmet's left side.
Identifies the fault reset button and charging port on the helmet's back.
Details functions of the (+) Button, (-) Button, and Center Button.
Explains how to use the Sena Utility App for setup and management.
Describes using Sena Device Manager for firmware upgrades and settings.
Instructions for turning the helmet on and off.
How to adjust the helmet's audio volume.
Methods to check the current battery status visually and audibly.
Steps for pairing the helmet with a mobile phone, MP3, or GPS.
How to answer, end, or reject incoming phone calls.
Procedures for pairing the helmet with other intercom users.
Explains button operations for intercom functionality.
Instructions for establishing two-way intercom conversations.
Steps for starting and ending group intercom sessions.
Instructions for turning the FM radio on and off.
How to scan, seek, and save FM radio stations.
How to navigate through saved radio preset stations.
Accessing and navigating the Bluetooth system configuration menu.
Steps to perform a factory reset on the device.
Procedure for a fault reset to resolve minor issues.
To Next Page
