Need help?Do you have a question about the Sena ACS-RAM and is the answer not in the manual?
General| Charging time | 2.5 hours |
|---|---|
| Headset Profile (HSP) | Yes |
| Hands-Free Profile (HFP) | Yes |
| Advanced Audio Distribution Profile (A2DP) | Yes |
| Audio Video Remote Control Profile (AVRCP) | Yes |
| FM Radio | Yes |
| Certificates | CE, FCC, IC |
| Operating Temperature | -10°C to 55°C |
| Battery Type | Lithium |
| Intercom working distance | Up to 1.2 miles (1.9 km) |
| Supports | Bluetooth intercom |
| Audio Codec | SBC |
| Noise Cancellation | Yes |
Key features including Bluetooth 5.0, Two-Way Intercom, intercom range, and Advanced Noise Control.
Identification of physical components like speakers, buttons, microphone, and charging port.
List of all items included in the ACS-RAM package for initial setup and use.
Step-by-step guide for attaching headset components to a helmet, including speaker placement.
Instructions for downloading and using the SENA MOTORCYCLES App and Sena Device Manager.
Guide to charging the headset, including charging time and important notes on power sources.
Explanation of icons and symbols used to represent button operations and audio prompts in the manual.
Procedures for turning the headset on and off using the device's buttons.
Describes the automatic phone pairing mode activated when the headset is first turned on or reset.
Steps to pair the headset with a phone when the headset is powered off.
Procedure for pairing the headset with a phone when the headset is already powered on.
Guide to managing phone calls, including answering, rejecting, ending, and voice dialing.
Instructions for controlling music playback, including play, pause, next, and previous track functions.
Guide to pairing headsets using QR codes via the SENA MOTORCYCLES App.
Details the button-based method for initiating and confirming intercom pairing between two headsets.
How to start and end two-way conversations with a paired intercom friend.
Guide to pairing with non-Sena Bluetooth headsets using the Universal Intercom feature.
Initiating and ending two-way conversations with non-Sena headsets.
Details the hierarchy of audio sources like mobile phone, intercom, and music.
Instructions for updating the headset firmware using the Sena Device Manager.
How to access, navigate, and operate the headset's configuration menu options.
Steps to remove all Bluetooth pairing data from the headset.
Configuring headset features like language, equalizer, VOX, HD Intercom, and HD Voice.
How to choose the device's operational language.
Adjusting audio frequency ranges (Balance, Bass, Mid, Treble Boost).
Enabling voice activation for answering calls and its limitations.
Enhancing intercom audio quality to HD and its range considerations.
Improving phone call clarity and its interaction with intercom.
Information regarding which voice prompts are always active.
Reducing background noise during intercom conversations.
How to perform a fault reset by connecting the headset to a power source.
Restoring the headset to its original factory default settings.
To Next Page
