Sena ACS-RAM - Installing the Headset on Your Helmet; Installing the Headset

ACS-RAM Motorcycle Bluetooth
®
Communication System | 8
2. INSTALLING THE HEADSET ON YOUR
HELMET
• The ACS-RAM fits best when installed on the Arai SZ-R VAS Helmet.
2.1 Installing the Headset
1. Peel off the cover of the male hook and loop fasteners for the
speakers to expose the adhesive surface. Then, attach the fasteners
to the back sides of speakers.
2. Peel off the cover of the female hook and loop fasteners for the
speakers to expose the adhesive surface. Then, attach the fasteners
to the ear pockets inside the helmet.
3. Attach the speakers to the hook and loop fasteners use for the
speaker inside the helmet.
CHAPTER