Need help?Do you have a question about the Sena SRL2 and is the answer not in the manual?
General| Bluetooth Version | Bluetooth 4.1 |
|---|---|
| Talk Time | 10 hours |
| Charging Time | 2.5 hours |
| FM Radio | Yes |
| Battery Type | Lithium Polymer Battery |
| Certificates | CE, FCC, IC |
| Music Sharing | Yes |
| Voice Command | Yes |
| Intercom Range | 1.6 km (1.0 mile) |
| Operating Temperature | -10°C to 55°C (14°F to 131°F) |
| Profiles | Headset Profile (HSP), Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), Audio Video Remote Control Profile (AVRCP) |
| Audio Features | Advanced Noise Control™ |
| Compatibility | Shoei GT-Air II, Shoei Neotec II, Shoei J-Cruise II |
| Mobile App Support | Yes |
| Intercom Participants | 8-Way Intercom |
Details precautions to avoid injury or damage during product use.
Describes the procedure for securely installing the SRL2 on a flip-up helmet.
Describes the procedure for securely installing the SRL2 on a full-face helmet.
Instructions on how to turn the headset on and off.
Details on how to charge the SRL2 headset and battery warnings.
Steps to pair the SRL2 with a mobile phone via Bluetooth.
Instructions for pairing a second mobile phone or other Bluetooth device.
How to pair the SRL2 with Bluetooth stereo devices for music playback.
Guide for pairing the SRL2 with a Bluetooth GPS device for navigation audio.
Instructions for pairing the SRL2 with the Sena SR10 two-way radio adapter.
Guide on answering, ending, rejecting, and making phone calls.
Instructions on assigning and using speed dial presets for quick calls.
Steps to enter voice command mode and list of available commands.
Instructions for pairing multiple SRL2 headsets for intercom.
Guide for pairing SRL2 with different Sena headset models.
How to start and end a two-way intercom conversation.
Instructions for setting up and managing multi-way intercom conversations.
How to pair the SRL2 with non-Sena Bluetooth headsets.
How to initiate a two-way universal intercom connection.
Steps to restore the SRL2 to its original factory default settings.
How to use the pin-hole reset button for troubleshooting.
To Next Page
