Need help?Do you have a question about the Sena SF1-01 and is the answer not in the manual?
General| Bluetooth Version | 4.1 |
|---|---|
| Talk Time | 10 hours |
| Water Resistance | IP67 |
| Speaker Driver Unit | 40 mm |
| Charging Time | 2.5 hours |
| Type | Headset |
| Operating Temperature | -10°C to 55°C (14°F to 131°F) |
| Microphone Type | Noise-canceling |
| Compatibility | Bluetooth-enabled devices |
| Standby Time | 1 week |
Procedure for attaching the main unit to the helmet using the clamp kit.
Alternative method for mounting the main unit using adhesive.
Instructions for attaching the speakers inside the helmet.
Guide for mounting the wired boom and wired microphones.
Information on charging the headset using a USB cable.
Instructions for pairing the headset with a mobile phone.
Steps for pairing with other intercom users.
How to make, answer, and end calls with the mobile phone.
Establishing and managing two-way intercom conversations.
Setting up and managing three-way intercom calls.
Setting up and managing four-way intercom calls.
Making three-way intercom with non-Sena headsets.
Configuring second mobile phone pairing via voice menu.
Configuring universal intercom pairing via voice menu.
Performing a basic reset for malfunctions.
Restoring the headset to its original factory settings.
To Next Page
