Need help?Do you have a question about the Sena STRYKER and is the answer not in the manual?
General| Bluetooth | Bluetooth 5.0 |
|---|---|
| Intercom Range | Up to 2 km (1.2 miles) |
| Intercom Participants | Up to 4 riders |
| FM Radio | Yes |
| Operating Temperature | -10°C to 55°C (14°F to 131°F) |
| Charging Temperature | 0°C to 45°C (32°F to 113°F) |
| Codec | Built-in SBC Codec |
| Audio Multitasking | Yes |
| Voice Command | Yes |
| Charging Time | Approximately 3 hours |
| Profiles | HSP, HFP, A2DP, AVRCP |
| Audio | Advanced Noise Control |
| Battery Type | Lithium Polymer Battery |
| Mobile App Support | Yes (Sena Motorcycle App) |
| Sizes | M, L, XL |
Lists key features like Bluetooth 5.0, Mesh Intercom range, and Audio Multitasking.
Instructions on how to charge the Bluetooth system and battery life.
Overview of pairing the system with a mobile phone.
How to answer, end, and reject phone calls.
How to play, pause, skip tracks, and control music playback.
Introduction to Sena's Mesh Intercom technology and its capabilities.
Explanations of Open Mesh and Group Mesh intercom modes.
Methods for pairing with other Bluetooth intercom systems.
How to start and end two-way intercom conversations with friends.
Enabling conference calls and steps for a three-way intercom.
Steps for a four-way conference and how to end multi-way calls.
How to combine phone calls with intercom conversations.
How to pair with non-Sena Bluetooth headsets.
Details on automatic firmware updates via Wi-Fi, including connection and LED status.
How to access and navigate the Bluetooth system's configuration menu.
Procedures for fault reset and restoring factory default settings.
To Next Page
