Need help?Do you have a question about the Sena SF2 and is the answer not in the manual?
General| Bluetooth | Bluetooth 4.1 |
|---|---|
| Charging Time | 2.5 hours |
| Advanced Noise Control | Yes |
| FM Radio | No |
| Rider Capacity | 2 |
| Headset Profile | HSP |
| Hands-Free Profile | HFP |
| Advanced Audio Distribution Profile | A2DP |
| Audio Video Remote Control Profile | AVRCP |
| Voice Command Support | No |
| Mobile Phone Connectivity | Yes |
| Music Sharing | Yes |
| Talk Time | 13 hours |
| Weight | 35 g (1.2 oz) |
| Operating Temperature | -10°C to 55°C |
| Dimensions Main Module | 73.3 mm x 38.7 mm x 16.6 mm (2.9 in x 1.5 in x 0.7 in) |
Instructions for attaching the main headset unit using clamp or glued adapters.
Guide for mounting the headset speakers inside the helmet.
Instructions for attaching wired boom and wired microphones.
Guide to pairing with a mobile phone or Bluetooth stereo device.
Pairing a second mobile phone, GPS, or SR10 adapter.
Configuring selective pairing for A2DP stereo music or HFP calls.
Steps to pair SF Series headsets for intercom conversations.
Starting and ending two-way intercom conversations.
Establishing and managing three-way conference intercom calls.
Configuring four-way intercom calls with multiple users.
Navigating the headset configuration menu using voice prompts.
Restoring factory defaults and exiting the voice configuration menu.
Resolving issues with fault reset and restoring factory defaults.
To Next Page
