Sena SF2 User Manual

SF Series
44
14.9 Factory Reset
Voice Prompt
“Factory reset”
Factory Default N/A
Execute Tap the Center Button
To restore factory default settings on the SF Series, tap the (+) Button
or the (-) Button until you hear a voice prompt, “Factory reset”, and
tap the Center Button to conrm. The SF Series power off with a voice
prompt, “Headset reset, goodbye”.
14.10 Exit Voice Conguration Menu
Voice Prompt
“Exit conguration”
Factory Default N/A
Execute Tap the Center Button
To exit voice conguration menu and get back to stand-by mode, tap
the (+) Button or the (-) Button until you hear a voice prompt, “Exit
conguration”, and tap the Center Button to conrm.
Tap (+) Button or (-) Button Tap Center Button
Phone Pairing None
Second Mobile Phone Pairing None
GPS Pairing None
Phone Selective Pairing None
Media Selective Pairing None
Delete All Pairings Execute
Remote Control Pairing Execute
Universal Intercom Pairing Execute
Factory Reset Execute
Exit Conguration Execute
Voice Conguration Menu & Button Operations

Sena SF2 Specifications

General

Bluetooth	Bluetooth 4.1
Charging Time	2.5 hours
Advanced Noise Control	Yes
FM Radio	No
Rider Capacity	2
Headset Profile	HSP
Hands-Free Profile	HFP
Advanced Audio Distribution Profile	A2DP
Audio Video Remote Control Profile	AVRCP
Voice Command Support	No
Mobile Phone Connectivity	Yes
Music Sharing	Yes
Talk Time	13 hours
Weight	35 g (1.2 oz)
Operating Temperature	-10°C to 55°C
Dimensions Main Module	73.3 mm x 38.7 mm x 16.6 mm (2.9 in x 1.5 in x 0.7 in)