Sena SF2 User Manual

SF Series
20
5.4 Intercom Pairing (SF2, SF4)
5.4.1 Pairing with Other SF2/SF4 Headsets for Intercom
Conversation
The headset can be paired with up to three other headsets for
Bluetooth intercom conversation.
1. Turn on the two headsets (A and B) that you would like to pair with
each other.
2. Press and hold the Center Button for 5 seconds, then you will
hear a mid-toned single beep and the voice prompt, “Intercom
pairing”.
3. Simply tap the Center Button of any one of the two headsets
A or B and wait until the intercom connection is automatically
established. The two headsets A and B are paired with each other
for intercom conversation. If the pairing process is not completed
within one minute, the headset will return to stand-by mode.
A
B
C
D
Pairing A & B

Sena SF2 Specifications

General

Bluetooth	Bluetooth 4.1
Charging Time	2.5 hours
Advanced Noise Control	Yes
FM Radio	No
Rider Capacity	2
Headset Profile	HSP
Hands-Free Profile	HFP
Advanced Audio Distribution Profile	A2DP
Audio Video Remote Control Profile	AVRCP
Voice Command Support	No
Mobile Phone Connectivity	Yes
Music Sharing	Yes
Talk Time	13 hours
Weight	35 g (1.2 oz)
Operating Temperature	-10°C to 55°C
Dimensions Main Module	73.3 mm x 38.7 mm x 16.6 mm (2.9 in x 1.5 in x 0.7 in)