Sena STRYKER - Troubleshooting; Fault Reset & Factory Reset

Stryker Motorcycle Bluetooth
®
Helmet with Mesh Intercom™ | 68
16. TROUBLESHOOTING
Please visit sena.com for more troubleshooting information.
• Customer Support: sena.com
16.1 Fault Reset
When the Bluetooth system is not working properly, you can easily reset
the unit:
1. Locate the Pinhole Fault Reset Button above the Magnetic DC
Power Charging & Firmware Upgrade Port.
2. Gently insert a paper clip into the hole and press and Pinhole Fault
Reset Button with light pressure.
=
FAULT
RESET
3. The Bluetooth system will shut down.
Note: Fault Reset will not restore the Bluetooth system to factory
default settings.
16.2 Factory Reset
To erase all of your settings and start fresh, the Bluetooth system can be
restored to factory default settings using the Factory Reset feature.
1.
=
10s
HOLD
“ Configuration menu”
2.
=
2x
TAP
“ Factory reset”
3.
=
1x
TAP
“ Headset reset,
good-bye”
CHAPTER