Sena STRYKER User Manual

Stryker Motorcycle Bluetooth
®
Helmet with Mesh Intercom™ | 13
2. WEARING THE HELMET
2.1 Putting on the Helmet
1. Unfasten the chinstrap by using the retention system.
2. Expand the helmet opening with your hand, and slide your head into
the helmet.
3. Fasten the chinstrap as tight as possible without causing you pain.
2.2 Removing the Helmet
1. Unfasten the chinstrap by using the retention system.
2. Gently pull the padded chinstrap outward and slide the helmet off
your head.
Note: Fastening the chinstrap after removing the helmet will help
avoid scratching surfaces it’s placed upon.
Quick-release retention system
2
1
One-touch BuckleChinstrap
Strap Adjuster
CHAPTER

Sena STRYKER Specifications

General

Bluetooth	Bluetooth 5.0
Intercom Range	Up to 2 km (1.2 miles)
Intercom Participants	Up to 4 riders
FM Radio	Yes
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Charging Temperature	0°C to 45°C (32°F to 113°F)
Codec	Built-in SBC Codec
Audio Multitasking	Yes
Voice Command	Yes
Charging Time	Approximately 3 hours
Profiles	HSP, HFP, A2DP, AVRCP
Audio	Advanced Noise Control
Battery Type	Lithium Polymer Battery
Mobile App Support	Yes (Sena Motorcycle App)
Sizes	M, L, XL