Sena STRYKER - Removing the Breath Guard; Installing the Breath Guard; Replacing the Ear Cups

Stryker Motorcycle Bluetooth
®
Helmet with Mesh Intercom™ | 15
2 WEARING THE HELMET
2.5 Removing the Breath Guard
Pull the breath guard away from the chin guard until it separates
completely.
2.6 Installing the Breath Guard
Insert the three tabs of the breath guard into the slots.
2.7 Replacing the Ear Cups
1. Remove one of the ear cups and replace it with the thin ear cup
included in the package.
2. Repeat Step 1 on the opposite side.